MHC Bore Gauge setting gauge for Metric Bore Gauges range 0-150mm with 33 piece Gauge block set

Item number:
612-9101
Details
Additional Details Code = 612-9101| Range =0-150mm| Dimensions =72 x 106 x 200mm| Accuracy= .0025mm| Setting device base anvil=70 x 20mm| Adjustable Anvil =60 x 10mm (2 of each)| Depth Capacity =25mm| Centreliser capacity width=70mm| Gauge Block set=33 pieces Grade 2|
MHC 630-8100 Long Gauge Blocks sizes 5”, 6”, 7”, 8”, 10”, 12”, 16”, 20”  Grade 1

MHC 630-8100 Long Gauge Blocks sizes 5”, 6”, 7”, 8”, 10”, 12”, 16”, 20” Grade 1

MHC 630-0320 Grade 1, 32 Piece Metric 1mm Base Rectangular Steel Gauge Block Sets

MHC 630-0320 Grade 1, 32 Piece Metric 1mm Base Rectangular Steel Gauge Block Sets

MHC Bore Gauge setting gauge for Metric Bore Gauges range 0-150mm with 33 piece Gauge block set

Item number
612-9101

Bore Gage Setting Master Kit is used for accurately setting any bore gage
up to 150mm in diameter to an accuracy of 2.5 m. The Bore Gage Setting
Master Kit makes setting cylinder bore gages easy by eliminating the need
for ring gages or micrometers.

Specifications
Setting Device:
Base Anvil: 2.750" x .80"
Adjustable anvil: 2.375" x .375" (two each)
Internal capacity: 6"
Depth capacity: 1"
Centralizer capacity width: 2.625"
Quick-adjust holder for fast adjustment.
AS-2 Grade Gage Block Set
z 33 piece
z Maximum tolerance to: 1.2 m
z Certificate of Calibration to N.I.S.T.

Operating Instructions

1. For best accuracy, remove all excess preservative from the gage
blocks and base anvil (A) before use.
2. After determining the desired bore size to be measured with your
cylinder bore gage, choose the appropriate combination of gage blocks
to match the bore dimension.

3. Insert the gage blocks into the vertical column of the Bore Gage
Setting Master Kit. The column features a quick adjust (B) mechanism
to facilitate rapid movement of the clamping mechanism.

4. Add an adjustable anvil (C) as shown in the photo. Loosen the quick
adjust knob and lower the mechanism down on to the adjustable anvil.
With fingers on either side of the quick adjust (D), compress the spring with moderate pressure. Turn the knob (D) and lock in place the complete set up

5. Choose the appropriate spacer/post combination on your cylinder
bore gage to set the bore gage to the desired range of measurement.
6. Insert the cylinder bore gage into the Bore Gage Setting Master Kit
and while rocking the bore gage up and down*, determine the reversal
point of the bore gage. If you are using a dial cylinder bore gage, turn
the bezel of the indicator to set zero to the reversal point. If you are
using an electronic cylinder bore gage, the sum of the gage blocks
should be programed into the indicator and preset to size after the
reversal point is determined.

Care should be taken to ensure the bore gage is kept as vertical
as possible and not tilted to either side while rocking the bore
gage, which could result in a false reading

 

7. It is recommended to keep a light coat of preservative on the gage
blocks and base anvil while the gage is being stored to reduce the
possibility of corrosion.

MHC Bore Gauge setting gauge for Metric Bore Gauges range 0-150mm with 33 piece Gauge block set