Mitutoyo 963-241E Series 810 HR-430MS Rockwell Hardness Tester, Digital, Rockwell and Rockwell Superficial, Automatic

Item number:
963-241E
Details
Type of Hardness Test Rockwell/Rockwell/Superficial
Test Scales Rockwell
Max. Specimen Height 180mm (100mm if cover is attached)
Part Number 963-241E
Power supply AC100-240V, 1.2A
MQS Digital
SPC Output Yes
Functions Success or failure decision function, Offset revision function, Hardness conversion function
video
Additional Details |Table Up/Down Drive = Manual|Load Control = Automatic (loading duration unloading) with spring deformation feed back|
Mitutoyo 963-231E Series 810 HR-320MS Rockwell  Hardness Tester, Digital, Rockwell and Rockwell Superficial

Mitutoyo 963-231E Series 810 HR-320MS Rockwell Hardness Tester, Digital, Rockwell and Rockwell Superficial

Mitutoyo 811-019  Shore type A Test Stand for compact stand

Mitutoyo 811-019 Shore type A Test Stand for compact stand

Mitutoyo 963-241E Series 810 HR-430MS Rockwell Hardness Tester, Digital, Rockwell and Rockwell Superficial, Automatic

Item number
963-241E
£11,253.00 ex vat
£11,253.00 ex vat

HR-210MR/320MS/430MR/430MS Series 963-Rockwell Hardness

Series 200
FEATURES
  • The new frame design alllows the full 7.1” of specimen capcity without the need to cut a whole in the table.
  • Simple to operate; the Dial Type HR210 features an automatic zero reset. The digital HR320 model uses a flashing bar graph to indicate when the initial test force has been reached.
  • Automatic brake and automatic start function that prevents overloading and begins test cycle. The HR430 model also includes the dial a weight system for easier load selection.
  • All models are complete with Flat and VEE anvils, diamond and 1/6” carbide ball indenters, 2 HRC and 1 HRBW Rockwell blocks (MR models)s or 3 Rockwell blocks and an HR30N and HR30TW for MS testers

    Technical Data
    Preliminary test force: 29.42N*, 98.07N
    Test force
    Rockwell superficial*: 147.1, 294.2, 441.3N
    Rockwell: 588.4, 980.7, 1471N
    Test force setting: By dial
    Load control: Automatic
    (loading, duration, unloading) 
    Anvil: Flat (ø64mm) 
    Max. specimen height: 7.1" / 180mm
    Max. specimen depth: 6.5" / 165mm
    (from the center of indenter shaft) 
    Stage elevation: Manual
    Data output*: RS-232C, Digimatic code (SPC) 
    Power supply: 120V AC, 50/60Hz
    *HR320-430 only
 
 

 

£11,253.00 ex vat
Product Accessories