Haimer 80.365.40.FHN 3-D Edge Finder Universal 3D-Sensor with adapter BT40

Item number:
80.365.40.FHN
Details
Graduation 0.01mm
Measurement units Metric
video type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="100%" height="285">
Additional Details Description=Universal 3D-Sensor with adapter BT40| Overall Length A [mm] =138.6| Width B [mm] =65| Order No. = 80.365.40.FHN |
Haimer 80.364.40.FHN 3-D Edge Finder Universal 3D-Sensor with adapter SK40

Haimer 80.364.40.FHN 3-D Edge Finder Universal 3D-Sensor with adapter SK40

Haimer 80.365.40.FHN 3-D Edge Finder Universal 3D-Sensor with adapter BT40

Item number
80.365.40.FHN

 

 

Universal 3D-Sensor with integrated adapter

 

The Universal 3D-Sensor is a very precise and versatile measuring instrument for milling and EDM machines (insulated probe). The integrated adapter guarantees easiest handling and a maximum of comfort.

The 3D-Sensor is clamped into a tool holder and inserted into a milling spindle. Once clamped into the machine spindle, the run-out (T.I.R) is fully adjustable to Zero. Then, you are able to find exact positioning of the spindle axis on the edges of the workpiece. This allows for zeros to be set and the length to be measured quickly and easily. You may approach in any direction (X-, Y-, Z- axis – hence the name „3D-Sensor“). When the dial gage shows zero, the spindle axis is exactly on the workpiece edge

 

Only the HAIMER 3D-Sensor allows for the edge to be found on the first attempt. No calculating of the probe’s ball diameter is necessary – just Zero it out! Problems with mathematics or calculations are eliminated, allowing for fewer operator errors. Our 3D-Sensor is quick and easy, reducing the extra time needed with most edge-finders, increasing the productivity and accuracy of the operator. 

Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. 

Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine. Tram vises, find the center of your bore, find your edge and inspect parts - it is all possible with the HAIMER 3D-Sensor. The unit has a large overrun distance in connection with the fully tested preset breaking points giving the sensor long life. All Universal 3D-Sensors are individually tested and adjusted when being assembled in order to achieve a maximum of measuring precision.

The Sensor is waterproof according to IP 67.

Please take note: The given measuring precision of 0.01 mm only applies if the original HAIMER probe tips are used.

Included in delivery: Universal 3D-Sensor with integrated adapter, short probe tip Ø 4 mm

Technical data subject to change without prior notice.

Probe tips

Probe tips

The sensors can be equipped with a short (ball Ø 4 mm / 0.2") and a long (ball Ø 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed. 
The probe tips of course are compatible to all HAIMER 3D-Sensors.

 

Technical drawing

Measuring Instrument Universal 3D-Sensor with integrated adapter Technical Drawing
Universal 3D-Sensor with adapterSK30
A [mm] 144,00
Ø D [mm] 4
B [mm] 65
Smallest unit of measure [mm] 0,01
Order No. 
80.364.30.FHN    
c
Haimer 80.365.40.FHN 3-D Edge Finder Universal 3D-Sensor with adapter BT40