Microtechnicia 742032610P Galileo Micro Hardness Tester Standard loads : 10-25-50-100-200-300-500-1000 gf Additional loads : 2000-2500-3000-5000-10000 gf Load application : Motorised Standard lenses (either odservation or measurement) : 10x-40x Max magnif
Item number:
742032610P
Additional Details | Standard loads = 10-25-50-100-200-300-500-1000 gf|Additional loads = 2000-2500-3000-5000-10000 gf|Load application = Motorised|Standard lenses (either odservation or measurement) = 10x-40x|Max magnification with the standard lens = 100 x-400 x|Alternative lenses for observation / for measurement = 5 x -100 x/20 x-50 x| |
---|
Microtechnicia 742032610P Galileo Micro Hardness Tester Standard loads : 10-25-50-100-200-300-500-1000 gf Additional loads : 2000-2500-3000-5000-10000 gf Load application : Motorised Standard lenses (either odservation or measurement) : 10x-40x Max magnif
Item number
742032610P
Isoscan OD Automatic Micro-Hardness Tester
The ISOSCAN OD system the basic version of the automatic microhardness tester new line allows the Vickers microhardness testing of a sample by measuring the dimensions of an indentation automatically produced by the device itself.
Indentation measurement is carried out manually by means of a high-precision digital micrometric eyepiece.
The indentation itself is created automatically with electronic control of the test cycle.
The system consists of:
- Handy-placed knob load selector with test loads from 009807 to 9807 N (and optionally to 9807 N external loads)
- Microscope with 20 W halogen light source with continuous adjustment of intensity
- Manual rotating switching device for indenter and two lenses (10x and 40x standard)
- 10x digital micrometric eyepiece with 01 micron resolution calibrated for both lenses
- Motorized load application device
- Manual focusing device with specimen holder crosstable with manually operated co-ordinates 25x25 mm working stroke and 001 mm resolution
- Automatic test cycle under microprocessor electronics control
- Backlight LCD display provided with alphanumerical (8 lines x 16 characters) and graphic (128 x 4 pixels) readout
- 16-keys touchpanel for selection of testing parameters by means interactive menu
- Automatic working load readout for standard loads manual by keyboard for optional loads
- Automatic estimate of hardness value on the ground of diagonal measurement
- Automatic approximate conversion of the measured value into a different hardness scale or into tensile strength
- Calculation of statistical parameters such as average value standard deviation max and min values and number of measurements
- Besides it allows key-in parameters such as date specimen and batch number to be included in test reports for documentation
- Centronics parallel interface to the printer
- RS232C serial interface to PC or Host Computer
- Special interface for output to PC by keyboad emulation
- Display mode of result: single measurement list of all affected measurement table with all statistical parameters measurement histogram
The ISOSCAN OD system the basic version of the automatic microhardness tester new line allows the Vickers microhardness testing of a sample by measuring the dimensions of an indentation automatically produced by the device itself.
Indentation measurement is carried out manually by means of a high-precision digital micrometric eyepiece.
The indentation itself is created automatically with electronic control of the test cycle.
The system consists of:
- Handy-placed knob load selector with test loads from 009807 to 9807 N (and optionally to 9807 N external loads)
- Microscope with 20 W halogen light source with continuous adjustment of intensity
- Manual rotating switching device for indenter and two lenses (10x and 40x standard)
- 10x digital micrometric eyepiece with 01 micron resolution calibrated for both lenses
- Motorized load application device
- Manual focusing device with specimen holder crosstable with manually operated co-ordinates 25x25 mm working stroke and 001 mm resolution
- Automatic test cycle under microprocessor electronics control
- Backlight LCD display provided with alphanumerical (8 lines x 16 characters) and graphic (128 x 4 pixels) readout
- 16-keys touchpanel for selection of testing parameters by means interactive menu
- Automatic working load readout for standard loads manual by keyboard for optional loads
- Automatic estimate of hardness value on the ground of diagonal measurement
- Automatic approximate conversion of the measured value into a different hardness scale or into tensile strength
- Calculation of statistical parameters such as average value standard deviation max and min values and number of measurements
- Besides it allows key-in parameters such as date specimen and batch number to be included in test reports for documentation
- Centronics parallel interface to the printer
- RS232C serial interface to PC or Host Computer
- Special interface for output to PC by keyboad emulation
- Display mode of result: single measurement list of all affected measurement table with all statistical parameters measurement histogram